Servo reducer specifications _ brushless motor reducer
by：Zhenyu
2020-10-02
Cycloidal reducer in the working temperature of lubricating oil and normally should not exceed 90 degrees Celsius.
If the temperature is too high, the physical and chemical properties of oil will change.
For example, the lower the viscosity of the smooth oil can reduce smooth oil film bearing capacity, work could eventually lead to tooth surface and side glue directly contact.
dissipating method of cycloidal pinwheel reducer has the following three kinds:
natural cooling
if ordinary cabinets can not meet the requirement of the heat dissipation, can add a heat sink on the outside of the chassis, and arrange for heat sink, make natural air circulation.
2. Fan cooling
if the case of natural cooling effect is not ideal, you can use the fan cooling.
3. Water-cooled
the cycloidal reducer oil sump is equipped with coil pipes. Serpentine pipes are usually made of copper or brass. Mounted on the pipe cooling water and cooling water away with smooth wind hot oil.
dissipating method of cycloidal pinwheel reducer has the following three kinds:
natural cooling
if ordinary cabinets can not meet the requirement of the heat dissipation, can add a heat sink on the outside of the chassis, and arrange for heat sink, make natural air circulation.
2. Fan cooling
if the case of natural cooling effect is not ideal, you can use the fan cooling.
3. Water-cooled
the cycloidal reducer oil sump is equipped with coil pipes. Serpentine pipes are usually made of copper or brass. Mounted on the pipe cooling water and cooling water away with smooth wind hot oil.
