Servo reducer offer _ brushless motor reducer
by：Zhenyu
2020-10-02
Machine of decelerate of hard tooth flank in the long time of use or the use of overload, there might be some problems, will affect the use, affect the production efficiency.
The following is a common problem of machine of decelerate of hard tooth flank of the solution.
machine of decelerate of hard tooth flank
1, the abnormal noise in a fixed area: check if there's any loose for gear box fixed pieces, check the fasteners, using the specified fasteners.
2, the operating temperature is too high: check whether the lubricating oil is too much or lubricating oil aging metamorphism or lubricating oil impurities may more; Using the cooling fan gear box, box body surface is too dirty, need to clean up the body and cooling fan inlet; Check whether the cooling system is defective.
3, abnormal running noise, uniform: if it is a scroll or rolling noise, may be because the bearing damage need to change the bearing; If tap type noise may because of uneven mesh, need to check the oil.
4, abnormal running noise, uneven: probably because of lubricating oil with impurities. Need to check the oil.
5, non-return device on the working temperature: check non-return device is damaged, such as damage to timely replacement.
6, shaft end seal temperature is too high, should be installed because the shaft end connection is not clear, you just need to clean up the shaft end.
7, high temperature bearing position: check whether the lubricating oil is too much or whether lubricating oil aging metamorphism, need to check the oil; Check whether the lubrication pump damage or bearing damage, check if the machine of decelerate of hard tooth flank have damage need to be replaced in a timely manner.
8, lubricating oil leakage, may be the gear box connecting parts is not tight, loose connection fasteners, sealing components installed incorrectly, sealing element is damaged, not tightly coupled, lubricating oil too much, installation errors. Check the connecting bolt found loose to tight check the sealing parts in time and look at the situation more
machine of decelerate of hard tooth flank
1, the abnormal noise in a fixed area: check if there's any loose for gear box fixed pieces, check the fasteners, using the specified fasteners.
2, the operating temperature is too high: check whether the lubricating oil is too much or lubricating oil aging metamorphism or lubricating oil impurities may more; Using the cooling fan gear box, box body surface is too dirty, need to clean up the body and cooling fan inlet; Check whether the cooling system is defective.
3, abnormal running noise, uniform: if it is a scroll or rolling noise, may be because the bearing damage need to change the bearing; If tap type noise may because of uneven mesh, need to check the oil.
4, abnormal running noise, uneven: probably because of lubricating oil with impurities. Need to check the oil.
5, non-return device on the working temperature: check non-return device is damaged, such as damage to timely replacement.
6, shaft end seal temperature is too high, should be installed because the shaft end connection is not clear, you just need to clean up the shaft end.
7, high temperature bearing position: check whether the lubricating oil is too much or whether lubricating oil aging metamorphism, need to check the oil; Check whether the lubrication pump damage or bearing damage, check if the machine of decelerate of hard tooth flank have damage need to be replaced in a timely manner.
8, lubricating oil leakage, may be the gear box connecting parts is not tight, loose connection fasteners, sealing components installed incorrectly, sealing element is damaged, not tightly coupled, lubricating oil too much, installation errors. Check the connecting bolt found loose to tight check the sealing parts in time and look at the situation more
