Planetary reducer device _ eccentric gear reducer

How to speed reducer for effective inspection and maintenance. Different lubricating oil mix each other is prohibited. The oil plug, oil drain plug and the location of the ventilator is determined by the installation position. Their relevant position refer to the installation drawing to determine that speed reducer. Shanghai jin preach reducer below tells mainly through the replacement of oil, oil level check, to bring oil level screw reducer, check of the oil to illustrate.

one, for with oil level screw reducer

check the oil level, whether or not qualified; Install the oil level screw.

2, oil change

after cooling oil viscosity increases with difficulty, reducer should be under the operating temperature oil change. Cut off the power supply, prevent to get an electric shock! Waiting for reducer cooled down without burning dangerous!

3, note

injection with brand new oil; Oil amount shall conform to the installation location; Check the oil level in the oil level screw; Tighten the oil level screw and ventilator; When an oil change speed reducer should still keep warm; In the oil drain screw under one by oil pan; Open the oil level screw, ventilator and oil drain plug; All the oil out; Install drain plug.

4, the oil level check

to cut off the power supply, prevent to get an electric shock! Waiting for the reducer cooling; Remove the oil level screw check whether the oil is full of; Install the oil level screw.

5, oil check

to cut off the power supply, prevent to get an electric shock! Waiting for the reducer cooling; Open the oil plug, take sample; Check the oil viscosity index; If oil is obvious turbidity, it is recommended that the replacement as soon as possible.